Welcome to Nanjing Pengtu Power Supply Co. Ltd.

What is the role of the supplier?(2)


power supply module

For the TRIM output pin, the center of the output potentiometer and the center TRIM are all connected to +S, -S in the pin module, and the other two ends are connected to +S, -S respectively. There is no +S, and the -S ends receive the positive and negative outputs of the corresponding main circuit respectively (+S is connected to +Vin, -S is connected to -Vin), and then adjust the potentiometer. The resistance of the potentiometer is generally 5~10kΩ.

HVDC module power supply
High-power switching high-voltage DC power supplies are widely used in large-scale equipment such as electrostatic dust removal, water quality improvement, medical X-ray machines and CT machines. The voltage is as high as 50~159kV, the current reaches more than 0.5A, and the power can reach 100kW.
Since the 1970s, some Japanese companies have begun to use inverter technology to rectify the mains and invert it to an intermediate frequency of about 3kHz, and then boost it. In the 1980s, high-frequency switching power supply technology developed rapidly. Siemens of Germany uses power transistors as the main switching elements to increase the switching frequency of the power supply to above 20kHz. And the dry-type transformer technology is successfully applied to the high-frequency high-voltage power supply, the high-voltage transformer oil tank is cancelled, and the volume of the transformer system is further reduced.

supplier The ADJ output pins are divided into input adjustment and output adjustment. Output trim and output trim. The adjustment method of the TRIM pin is the same. When one end of the potentiometer is connected to the center, the output voltage can only increase the output voltage, and the other end is connected to the ground of the input.

Input protection circuit General 24 v Marine boost power supply supply products use built-in filters, which can meet the requirements of general Marine boost power supply applications. If a more demanding power system is required, supplier the input filter network should be added. Either LC or π can be used but care should be taken to choose a smaller inductance and larger capacitance.