Thailand acdc power module potting requirements(2)

Epoxies cannot be used for stress-sensitive and module sealing due to their hardness and are basically eliminated by module power supplies. However, due to its low cost, this epoxy is still used in cost-sensitive micropower supplies. Some domestic bad 48V input power supply manufacturers also use this epoxy resin acdc 48V input power supply module. However, due to stress problems, the failure rate of this 48V input power supply is very high, and buyers are miserable.

At present, the most commonly used power module is the addition of silicone. This kind of silica gel is generally 1:1, which is easy to operate. When acdc potting power modules, attention should be paid to its thermal conductivity. However, the bonding ability is not very strong, and it can be improved with primer.

HVDC module power supply
High-power switching high-voltage DC power supplies are widely used in large-scale equipment such as electrostatic dust removal, water quality improvement, medical X-ray machines and CT machines. The voltage is as high as 50~159kV, the current reaches more than 0.5A, and the power can reach 100kW.
Since the 1970s, some Japanese companies have begun to use inverter technology to rectify the mains and invert it to an intermediate frequency of about 3kHz, and then boost it. In the 1980s, high-frequency switching power supply technology developed rapidly. Siemens of Germany uses power transistors as the main switching elements to increase the switching frequency of the power supply to above 20kHz. And the dry-type transformer technology is successfully applied to the high-frequency high-voltage power supply, the high-voltage transformer oil tank is cancelled, and the volume of the transformer system is further reduced.

Polyurethane has been used in China for a period of time, but due to its high hardness, inconvenient maintenance, and the price reduction of silicone rubber, the cost performance of polyurethane is not high.