What is the role of the dc switching power supply?(2)

For the TRIM output pin, the center of the output potentiometer and the center TRIM are all connected to +S, -S in the pin module, and the other two ends are connected to +S, -S respectively. There is no +S, and the -S ends receive the positive and negative outputs of the corresponding main circuit respectively (+S is connected to +Vin, -S is connected to -Vin), and then adjust the potentiometer. The resistance of the potentiometer is generally 5~10kΩ.

dc switching Marine boost power supply The ADJ output pins are divided into input adjustment and output adjustment. Output trim and output trim. The adjustment method of the TRIM pin is the same. When one end of the potentiometer is connected to the center, the output voltage can only increase the output voltage, and the other end is connected to the ground of the input.

The secondary power DC/DC converter of the communication power supply has been commercialized. The module adopts high-frequency PWM technology, the switching frequency is about 500kHz, and the power density is 5W~20W/in3. With the development of large-scale integrated circuits, the module power supply is required to be miniaturized, so it is necessary to continuously increase the switching frequency and adopt new circuit topologies. The power density of the module power supply has been greatly improved.

Input protection circuit General switching Marine boost power supply module supply products use built-in filters, which can meet the requirements of general Marine boost power supply applications. If a more demanding power system is required, dc switching Marine boost power supply the input filter network should be added. Either LC or π can be used but care should be taken to choose a smaller inductance and larger capacitance.