What does a DC module power supply look like?(2)

DC module 48V input power supply The distinction between good circuit principles and bad circuit principles can often only be made from a professional perspective. At this stage, power modules can be roughly divided into two types: bare board and potting. The bare board can be based on intuitive methods, such as the layout of electronic components is reasonable, neat, generous, neat, and the solder joints are bright and straight. For encapsulated modules, it is not possible to see the internal conditions, but since the internal conditions are not exposed, it is much better in terms of safety and performance metrics. The soldering process can include hand soldering and wave soldering. The quality of the wave soldering process of mechanized production is better than that of manual soldering.

Regulation of output voltage
For module power products with TRIM or ADJ (adjustable) output pins, the output voltage can be adjusted within a certain range through resistors or potentiometers, and the general adjustment range is ±10%.
For the TRIM output pin, connect the center of the potentiometer to TRIM. In all modules with +S and -S pins, the other two ends are connected to +S and -S respectively. When there is no +S, -S, connect the two ends to the output positive and negative poles of the corresponding main circuit (+S to +Vin, -S to -Vin), and then adjust the potentiometer. The resistance value of the potentiometer is generally more appropriate to use 5 ~ 10kΩ.

DC module 48V input power supply Two: chip components

The core of the 48V input power supply is the IC, just like the brain of the 48V input power supply, the quality of the IC directly affects various parameters of the 48V input power supply.