What kind of 48V input power supply will be higher(4)

Electrolytic capacitors, aluminum electrolytic capacitors and monolithic gallbladders, which use sulfuric acid to make the insulating medium, large capacity can carry out smaller volumes for the above, and are marked with a + sign, some are marked with a mark, generally do low cross-linking and side-by-side Circuit filter with larger loss meson, integral aluminum electrolytic capacitor, due to the shortcomings of using special materials, the electrolytic performance is better than ordinary, the preferred frequency, but can not do too much capacity, it can be used to accurately circuits, such as oscillators, or timing circuits.

48V input power supplyFive: aging and batch test high temperature aging test

Regulation of output voltage
For module power products with TRIM or ADJ (adjustable) output pins, the output voltage can be adjusted within a certain range through resistors or potentiometers, and the general adjustment range is ±10%.
For the TRIM output pin, connect the center of the potentiometer to TRIM. In all modules with +S and -S pins, the other two ends are connected to +S and -S respectively. When there is no +S, -S, connect the two ends to the output positive and negative poles of the corresponding main circuit (+S to +Vin, -S to -Vin), and then adjust the potentiometer. The resistance value of the potentiometer is generally more appropriate to use 5 ~ 10kΩ.

No matter how good the material and production technology process control of the product is, it is necessary to detect the aging of the equipment. Because the incoming inspection of electronic components and transformers is difficult to control, only by improving the aging and high-temperature sampling of the entire batch of power supplies can we detect whether the quality stability and material management of this batch of power supplies have potential safety risks.