What is the role of the the 110 v input power supply?(2)
In the early 1980s, the research on the distributed high frequency switching power supply system basically focused on the research of the converter parallel technology. In the mid-to-late 1980s, with the rapid development of high-frequency power conversion technology, various converter topologies appeared one after another. Combined with large-scale integrated circuit and power component technology, it became possible to integrate small and medium power devices, thereby rapidly Promote the development of distributed high-frequency switching power supply system research. Since the late 1980s, this direction has become a research hotspot in the international power electronics field.
For the TRIM output pin, the center of the output potentiometer and the center TRIM are all connected to +S, -S in the pin module, and the other two ends are connected to +S, -S respectively. There is no +S, and the -S ends receive the positive and negative outputs of the corresponding main circuit respectively (+S is connected to +Vin, -S is connected to -Vin), and then adjust the potentiometer. The resistance of the potentiometer is generally 5~10kΩ.
the 110 v input Marine boost voltage power supply The ADJ output pins are divided into input adjustment and output adjustment. Output trim and output trim. The adjustment method of the TRIM pin is the same. When one end of the potentiometer is connected to the center, the output voltage can only increase the output voltage, and the other end is connected to the ground of the input.
Input protection circuit General the 110 v input Marine boost voltage power supply supply products use built-in filters, which can meet the requirements of general Marine boost voltage power supply applications. If a more demanding power system is required, the 110 v input Marine boost voltage power supply the input filter network should be added. Either LC or π can be used but care should be taken to choose a smaller inductance and larger capacitance.