What is the role of the custom-make?(1)

For dc switching power supply products with TRIM or ADJ (adjustable) output pins, the output voltage can be adjusted within a certain range through resistors or potentiometers, custom-make and the general adjustment range is ±10%.

Diode loss
Diode rectification is used in traditional rectification, and Schottky diode rectification is generally used under low voltage output conditions. Compared with other rectifier diodes, Schottky diodes have the advantages of faster switching speed and lower forward voltage, but Schottky diodes The forward voltage drop of the diode is related to the size of the rectified output current. The larger the rectified output current is, the greater the forward voltage drop, which may be as high as 0.5~0.6V or more, and the reverse leakage current of the Schottky diode is larger. .

For the TRIM output pin, the center of the output potentiometer and the center TRIM are all connected to +S, -S in the pin module, and the other two ends are connected to +S, -S respectively. There is no +S, and the -S ends receive the positive and negative outputs of the corresponding main circuit respectively (+S is connected to +Vin, -S is connected to -Vin), and then adjust the potentiometer. The resistance of the potentiometer is generally 5~10kΩ.

custom-make The ADJ output pins are divided into input adjustment and output adjustment. Output trim and output trim. The adjustment method of the TRIM pin is the same. When one end of the potentiometer is connected to the center, the output voltage can only increase the output voltage, and the other end is connected to the ground of the input.