Vatican acdc power module potting requirements(1)

The potting of the acdc power module is very important. This process not only involves the protection of the power module potting acdc power module (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also involves the protection of the power module. thermal design.

Due to the wide variety of integrated circuits used in communication equipment, their power supply voltages are also different. In the communication power supply system, a high-frequency DC-DC isolation module power supply with high power density is used, which is converted from the intermediate bus voltage (usually 48V DC) to Various DC voltages are required, which can greatly reduce losses, facilitate maintenance, and are very convenient to install and increase. Generally, it can be directly installed on the standard control board, and the requirement for the secondary power supply is high power density. Due to the continuous increase of communication capacity, the capacity of communication power supply will also continue to increase.

Commonly used power module potting materials are divided into three categories: epoxy resin, polyurethane and silicone rubber

Epoxies cannot be used for stress-sensitive and module sealing due to their hardness and are basically eliminated by module power supplies. However, due to its low cost, this epoxy is still used in cost-sensitive micropower supplies. Some domestic bad LED advertising screen power supply manufacturers also use this epoxy resin acdc LED advertising screen power supply module. However, due to stress problems, the failure rate of this LED advertising screen power supply is very high, and buyers are miserable.