What kind of 48V input power supply will be higher(3)

The core problem of the Marine boost power supply is the IC, which is like the brain of the Marine boost power supply. The quality of the IC can directly affect the various working parameters of the Marine boost power supply.

(6) For the module power supply, some manufacturers have a fixed resistance directly connected to the adjustable terminal (ADJ) from the factory. When using, the user must configure a potentiometer with the corresponding resistance value to replace the fixed resistance. However, it should be noted that when the adjustable terminals are in an open state, loading is never allowed.
(7) In order to achieve sufficient heat dissipation, the module power supply should be installed in a location with better air convection. Generally, when the working current of the linear power supply is above 4A, or the working current of the switching power supply is above 7A, forced air cooling should be installed. In addition, no other items are allowed on the module power supply housing.
(8) The module power supply is generally suitable for resistive-based loads. If it needs to be applied to capacitive-based or inductive-based loads, it should be explained in the order contract in advance and customized by the manufacturer.

Three: Transformer components

Determine power, temperature and transformer. The transformer is responsible for the AC-DC Marine boost power supply, and the energy overload will saturate.

48V input Marine boost power supplyFour: Electrolytic and ceramic capacitors

Electrolytic capacitors, aluminum electrolytic capacitors and monolithic gallbladders, which use sulfuric acid to make the insulating medium, large capacity can carry out smaller volumes for the above, and are marked with a + sign, some are marked with a mark, generally do low cross-linking and side-by-side Circuit filter with larger loss meson, integral aluminum electrolytic capacitor, due to the shortcomings of using special materials, the electrolytic performance is better than ordinary, the preferred frequency, but can not do too much capacity, it can be used to accurately circuits, such as oscillators, or timing circuits.